28
Tip: You can
also enter the
menu system
by pressing
f 1.

Entering the Menu System

Press f, then press = to access the menu.
You see Recent Calls.

Placing and Ending a Call

Use the Smart Button to place and end a call, as
described in “Placing a Call” on page 28 and
“Ending a Call” on page 29.
Placing a Call
To place a call:
1. Power the phone on by pressing and holding
until the display appears and you hear an
audible alert.
2. Enter the number you want to call.
If you make a mistake, press c to erase
one digit at a time. Press and hold c to
clear the entire entry.
You can also recall a previously dialed or
stored number. (See “Using Phone Memory”
on page 33 for details.)
3. To place the call, press and hold = until you
hear two tones.
or
Press S.
You hear a single-tone alert (if keypad tones
are turned on) and see Dialing
XXXXXXX
.
4. You can dial phone numbers with up to 32
digits, but only the last 20 digits appear in the
display.
Press r to see the entire phone number.