Model Plate

1

30

3

81

11

63

6

47

C3

-00-

LLX

20

OB

28

DT.

-00-

O.

30

MP

38

Figure 1

Sample Model Number

1 3 A M 7 9 0 G 0 0 0

Indicates Model Series 700

Figure 2

Snow Thrower

Attachment

NOTE: This Operator’s Manual covers several models. Snow thrower hook-up instructions vary by model. Not all features discussed in this manual are applicable to all snow thrower attachments. Assistance may be needed to complete instalation.

To The Owner

Model OEM-190-032 two-stage snow thrower attachment is designed for use on FastAttach™ Compatible Lawn Tractors and Garden Tractors ONLY. It will NOT fit nor operate properly or safely on ANY other tractor.

Determine The Model

of Your Rider

Since this manual is designed for installation of your new snow thrower attachment on several different rider units, it is important for you to determine which model of rider you have. Therefore you will know which set of instructions in the following pages to follow.

To determine which model of rider you have, you will need to locate the rider’s model plate, located under the seat. Simply flip the seat up and locate the model plate, which will consist of an 11 digit/letter model number and a serial number. For ease in this installation and for future use, copy your rider’s model number & serial number below now:

Rider Model Number:__ __ __ __ __ __ __ __ __ __ __

Rider Serial Number:_________________________

The 5th, 6th & 7th numbers from the left in your model number determine your rider’s model series. See Figure 2.

When you fill in your model number in the space above, the actual model series number should fall into the gray shaded area.

Now that you have determined what model rider you are attaching this snow thrower attachment to, follow the instructions in the following pages according to your model of rider. You can locate which instructions apply to your model of rider by the gray-shaded area in the border of each page. For instance, an 809 or 80R would signify that you should follow the instructions for Model Series 800.

1

Rider Model Identification

NOTE:

References to LEFT

and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR, the rear end of the rider.