troubleshooting

 

 

 

 

 

 

 

 

 

Troubleshooting (Walk-Behind Trowel)

 

Symptom

possible problem

 

Solution

 

 

 

 

 

Engine ON/OFF Switch in "OFF" position

 

Make sure that the Engine ON/OFF Switch is ON

 

or malfunctioning?

 

or replace switch if necessary.

 

Centrifugal ON/OFF Switch in "OFF"

 

Place centrifugal stop switch in "ON" position.

 

position or malfunctioning?

 

Check wiring. Replace switch if necessary.

 

 

 

 

 

 

 

Look at the fuel system. Make sure there is fuel

Engine running rough or not at all.

Fuel?

 

being supplied to the engine. Check to ensure that

 

 

 

the fuel fi lter is not clogged.

 

Ignition?

 

Check to ensure that the ignition switch has power

 

 

and is functioning correctly.

 

 

 

 

 

 

 

 

Loose wire connections

 

Check wiring. Replace or repair as necessary.

 

 

 

 

 

Bad contacts in ON/OFF switch?

 

Replace ON/OFF switch.

 

 

 

 

 

 

 

Make certain blades are in good condition, not

 

 

 

excessively worn. Finish blades should measure

 

Blades?

 

no less than 2"" (50mm) from the blade bar to

 

 

the trailing edge, combo blades should measure

 

 

 

 

 

 

no less that 3.5"" (89mm). Trailing edge of blade

 

 

 

should be straight and parallel to the blade bar.

 

 

 

Check that all blades are set at the same

 

Pitch adjustment?

 

pitch angle as measured at the spider. A fi eld

 

 

adjustment tool is available for height adjustment

 

 

 

 

 

 

of the trowel arms. (Contact Parts Dept.)

 

 

 

Check the spider assembly for bent trowel arms.

 

Bent trowel arms?

 

If one of the arms is even slightly bent, replace it

Trowel bounces, rolls concrete, or makes

 

 

immediately.

 

 

 

uneven swirls in concrete.

 

 

Check fi t of arms in spider. This can be done by

 

Spider?

 

moving the trowel arms up and down. If there is

 

 

more than 1/8 inch (3.2 mm) of travel at the tip of

 

 

 

 

 

 

the arm, the spider and arms should be replaced.

 

 

 

 

 

 

 

Check the fl atness of the thrust collar by rotating

 

Thrust collar?

 

it on the spider. If it varies by more than 0.02 inch

 

 

 

(0.5 mm) replace the thrust collar.

 

 

 

 

 

 

 

Check the thrust collar by rocking it on the spider.

 

Thrust collar bushing?

 

If it can tilt more than 3/32 inch (2.4 mm) - as

 

 

measured at the thrust collar O.D., replace the

 

 

 

 

 

 

thrust collar.

 

 

 

 

 

Thrust bearing worn?

 

Check the thrust bearing to see that it is spinning

 

 

freely. Replace if necessary.

 

 

 

 

 

 

 

page 40 — J36S60 WALK-BEHIND TROWEL • operation and parts manUAL — rev. #1 (01/23/13)

Page 39 Page 41
Page 40
Image 40
Multiquip J36S60 manual Or malfunctioning? Or replace switch if necessary
Page 39 Page 41

J36S60 specifications

The Multiquip J36S60 is a versatile and robust generator designed for various applications, ranging from construction sites to outdoor events. With a focus on reliable power and durability, the J36S60 is engineered to meet the demanding requirements of professionals and contractors alike.

At the heart of the J36S60 is its powerful engine, which provides a maximum output of 36 kVA. This generator is equipped with a 60Hz, 240V output, making it suitable for a wide range of equipment and tools. The J36S60 features a fuel-efficient design, allowing for extended run times that minimize downtime on job sites. It can operate for hours on end, ensuring that you have continuous power for critical tasks.

One of the standout features of the J36S60 is its state-of-the-art control panel. The intuitive control panel provides clear access to various functions, making it easy for users to monitor power output, fuel levels, and maintenance intervals. The panel includes circuit breakers, hour meters, and an easy-to-read digital display, ensuring that operators have all necessary information at their fingertips.

Additionally, the Multiquip J36S60 generator incorporates advanced technologies for noise reduction and fuel efficiency. Its innovative design includes sound-dampening materials and a high-capacity silencer, resulting in quieter operation compared to traditional generators. This feature makes it especially suitable for urban environments where noise regulations are strictly enforced.

The J36S60 is built with durability in mind. The heavy-duty steel frame and powder-coated finish ensure that it can withstand the rigors of demanding job sites and adverse weather conditions. Furthermore, the unit is designed for easy transport, with integrated lifting hooks and a compact design that allows for convenient positioning and relocation.

Safety is a priority with the J36S60, which comes equipped with multiple safety features including low oil shutdown, overload protection, and an emergency stop button. These safety mechanisms ensure that both the operator and the machinery are protected during operation.

Overall, the Multiquip J36S60 is a high-performance generator that excels in providing reliable power in a variety of settings. Its combination of power output, efficient fuel consumption, user-friendly controls, and robust build quality makes it an excellent choice for construction professionals, event coordinators, and anyone in need of dependable portable power.
Top Page Image Contents