Chapter 4 – Configuring the RouteFinder
Wizard Setup
Save & Restart Button Under Menu Bar
Select the Save and Restart button located just under the menu bar. The Save and Restart screen displays.
Save to Flash Memory
If a connection is established, then the settings have been entered correctly and your basic configuration is now complete. Now, you must save your settings to the Flash Memory; this saves the current settings in the flash prom and prevents settings from getting lost at the next power up.
Restart
This is optional. You do not have to restart the RouteFinder after saving to the flash memory.
Your Basic Configuration Using the Setup Wizard is now Complete.
Important Note About Save and Restart
After you have completed and saved the settings for other settings within the Web management software, you must save your settings to the Flash Memory. This is a final step after you have saved the settings on each individual screen.
25 |
