Muratec MFX-C3035 manual Layout Tab, Cover Mode Tab, Stamp/Composition Tab

" To display a list of jobs saved with a [Job Retention] setting, press [USB/HDD] in the home screen, and then press [Proof/Print]. Print the document by selecting the job in the list.

The password must be entered if one has been specified for the job.

[Layout] Tab

The [Layout] Tab allows you to

„Print several pages of a document on the same page (N in 1 printing)

„Print a single copy for enlargement and print several pages (PCL printer driver only)

„Rotate the print image 180 degrees

„Specify whether or not blank pages are printed (PCL and XPS printer driver only)

„Specify duplex (double-sided) printing

„Specify booklet printing

„Specify binding position

„Adjust the binding margin

„Specify the position on the paper where the document is to be printed (PCL printer driver only)

[Cover Mode] Tab

The [Cover Mode] Tab allows you to

„Print front and back cover pages and separator pages

„Specify the tray that contains the paper for the front and back cover pages and separator pages

[Stamp/Composition] Tab

" Be sure to use overlays with print jobs with a paper size and orienta- tion that matches the overlay form.

In addition, if settings have been specified for [N in 1] or [Booklet] in the printer driver, the overlay form cannot be adjusted to match the specified settings.

The settings in the Watermark function of the [Stamp/Composition] tab allows you to

„Select the watermark to be used

„Create, edit or delete watermarks

„Adjust the watermark position

Using the Postscript, PCL and XPS Printer Driver 5-9