Note

All data will be lost when the memory is cleared.

7.Once the correct probe temperature is displayed on the screen, press F4 (SAVE). The meter will automatically return to the measurements screen.

8.Alternately, press F1 (AUTO) to return to the default auto correct mode.

Clearing the Memory

If you determine that there is insufficient memory available to perform the desired logging task because much of the meter’s memory has been used, it will be necessary to empty the memory. All data will be lost when the memory is cleared.

To download the current memory contents prior to clearing the memory you must connect the 8718B to your computer. See Chapter 18, User's Software.

To clear the memory...

1.Access the settings menu by following the procedure described in Accessing the Settings Menu.

2.Press 3 (CLEAR MEMORY). A screen will appear requesting that you confirm your request and warning that the stored information will be lost.

C L E A R M E M O R Y

CL E A R I N G T H E M E M O R Y C A N N O T B E R E V E R S E D

C L E A R A B O R T

F1

F2

F3

F4

3.Press F1 (CLEAR) to clear the memory or F4 (ABORT) to return to the First Menu Screen without clearing the memory. Press Esc to return to the measurements screen.

Chapter 15 Advanced Settings

91