National Instruments NI-845x, NI-845x Software and Hardware Uninstalling the NI-845x Software

NI-845x Installation Guide 4 ni.com

To verify that the USB device is recognized, complete the following steps:

1. Double-click the Measurement and Automation icon on the desktop to

openMeasurement and Automation Explorer (MAX).

2. Expand Devices and Interfaces.

3. Verify that the device appears under USB Devices. If the device does not

appear, press <F5> to refresh the view in MAX. If the device is still not

recognized, refer to ni.com/support/install for troubleshooting

information.

Uninstalling the NI-845x Software

For Windows 2000/XP, complete the following steps to uninstall the NI-845x

software:

1. Select Start»Settings»Control Panel»Add or Remove Programs.

2. Select National Instruments Software. Click the Change button.

3. Select NI-845x Software in the list of products and click Remove.

For Windows Vista, complete the following steps to uninstall the NI-845x

software:

1. Select Start»Control Panel»Programs»Programs and Features.

2. Select National Instruments Software. Click the Uninstall/Change button.

3. Select NI-845x Software in the list of products and click Remove.