5 NI-DMMInstrument Driver Quick Reference

Triggers
ICON TYPE PARAMETER VALUE TO SET, COMMENTS
ViSession vi Session handle
ViInt32 Trigger Source Default = Immediate
ViReal64 Trigger Delay Default = Auto
ViSession vi Session handle
ViSession vi Session handle
ViInt32 Trigger Slope
ViSession vi Session handle
ViInt32 Slope
ViSession vi Session handle
ViInt32 Measurement Default = None
Complete
Destination
ViSession vi Session handle
ViInt32 Slope

niDMM Configure Meas Complete Slope

(niDMM_ConfigureMeasCompleteSlope)
Sets the MC signal to either rising edge or falling edge polarity.

niDMM Configure Meas Complete Dest

(niDMM_ConfigureMeasCompleteDest)
Specifies the destination of the Measurement Complete (MC) signal.

niDMM Configure Sample Trigger Slope

(niDMM_ConfigureSampleTriggerSlope)
Sets the Sample Trigger Slope property to either rising edge or falling edge polarity.

niDMM Configure Trigger Slope

(niDMM_ConfigureTriggerSlope)
Sets the Trigger Slope property to either rising edge or falling edge polarity.

niDMM Send Software Trigger

(niDMM_SendSoftwareTrigger)
Sends a command to trigger the DMM.

niDMM Configure Trigger

(niDMM_ConfigureTrigger)
Configures the DMM trigger source and trigger delay.
©

National Instruments Corporation

322614f.qxp 11/23/2004 10:13 AM Page 5