National Instruments NI 9802 Sleep Mode

NI 9802 Operating Instructions and Specifications 8 ni.com

Do not open an SD Card slot door or remove an SD Card while the

yellow LED for that card is lit or flashing. If you open an SD Card

slot door while the yellow LED for that card is lit or flashing, the

NI9802 software acts to protect the file system of the SD Card.

Refer to the software documentation for more information.

Caution Opening an SD Card slot door or removing an

SD Card while the yellow LED for that card is lit or

flashing might result in incomplete data.

You must close the slot door for the NI9802 software to read from

or write to the SD Card.

Note Screw the slot doors closed completely using a

#1Phillips screwdriver. Do not overtighten.

Sleep Mode

This module supports a low-power sleep mode. Support for sleep

mode at the system level depends on the chassis that the module is

plugged into. Refer to the chassis documentation for information