SSR Series Modules and Backplanes 4
©
National Instruments Corporation
The SSR backplanes are divided into ports of eight modules each. The
8-, 16-, 24-, and 32-module backplanes have one, two, three, and four
ports respectively.
Table2 shows backplanes that need an interface to convert the digital
input/output (DIO) lines to map correctly. Table2 also shows cables that
are available for connecting DAQ devices and SSR backplanes. Refer to the
National Instruments catalogue if your system is not listed in the table.
If you need an interface, use the SC-205X Series devices. You can connect
backplanes that do not need an SC-205X Series device directly to a DAQ
device because the modules map directly to one or more DIO ports.
The SC-205X Series devices break out different DIO ports for use with
different products. For information on connecting, mounting, and cabling
your DIO ports using the SC-205X, see your SC-205X Series User Manual.
Table 2. SSR Backplane Cabling Guide
DAQ Device 8-Module
Backplane 16-Module
Backplane 24-Module
Backplane 32-Module
Backplane
DIO-24 (6503)
except
DAQCard-DIO-24
NB1 cable
or SC-205X adapter2
(via NB8 cable)
NB1 cable NB1 cable NA
DAQCard-DIO-24 PSH27-50F-D11
cable or SC-205X
adapter (via NB8
cable)
PSH27-50F-D11
cable PSH27-50F-D11
cable NA
DIO-32HS (6533) SC-205X adapter2
(via NB8 cable) NA NA R6850-D1 cable1
DIO-96 (6508) SC-205X adapter2
(via NB8 cable) SC-205X adapter
(via NB8 cable) SC-205X ada pter
(via NB8 cable) NA
50-pin MIO Series,
68-pin MIO E
(60xx) Series,
Lab/1200 Series,
DAQCard-700,
PC-LPM-16,
PC-AO-2DC
SC-205X adapter 2
(via NB8 cable) NA NA NA
100-pin MIO E
(60xx) Series R1005050 cable1
or SC-205X adapter2
(via NB8 cable)
R1005050 cable1R1005050 cable1NA
1These cables are available separately and are not included with the SSR Series backplane.
2This adapter is available separately. See the National Instruments Catalogue for information about cabling to connect an
SC-205X to your DAQ device.
NA means not applicable