©
National Instruments Corporation I-1 PCI-6110E/6111E User Manual

Index

Numbers
+5 V signal
description (table), 4-3
power connections, 4-15
self-resetting fuse, 4-15, C-2
A
AC input coupling, 3-4
ACH<0..3>+ signal
analog input connections, 4-8
description (table), 4-3
differential connections
ground-referenced signal sources
(figure), 4-11
nonreferenced or floating signal
sources (figure), 4-12
signal summary (table), 4-6
ACH<0..3>- signal
analog input connections, 4-8
description (table), 4-3
differential connections
ground-referenced signal sources
(figure), 4-11
nonreferenced or floating signal
sources (figure), 4-12
signal summary (table), 4-6
ACH<0..3>GND signal
description (table), 4-3
differential connections
ground-referenced signal sources
(figure), 4-11
nonreferenced or floating signal
sources (figure), 4-12
signal summary (table), 4-6
AIGATE signal, 4-25
amplifier characteristic specifications,
A-3toA-4
analog input, 3-2to 3-5
dither, 3-4to 3-5
input coupling, 3-4
input mode, 3-2 to3-3
input polarity and range, 3-3 to3-4
questions about, C-2 toC-3
selection considerations, 3-4
signal connections, 4-8
specifications, A-1to A-5
amplifier characteristics, A-3to A-4
dynamic characteristics, A-4
input characteristics, A-1to A-2
stabili ty, A-4toA-5
transfer characteristics, A-2 toA-3
analog output, 3-5
questions about, C-2 toC-3
signal connections, 4-13
specifications, A-5to A-6
dynamic characteristics, A-6
output characteristics, A-5
stability, A-6
transfer characteristics, A-5
voltage output, A-5to A-6
analog trigger
above-high-level analog triggering mode
(figure), 3-8
avoiding false triggering (note), 3-6
PCI_E.book Page 1 Thursday, June 25, 1998 12:55 PM