Section 4

NOTICE

The purpose of the battery selector switch is to keep one as a spare. If both batteries are ON and one battery is used to start your engine, and the other for accessories, both batteries will become discharged. This will eliminate your spare and could leave you stranded.

Make sure the battery connections stay clean and secure.

Automatic Bilge Panel

Bilge Pump Only Mode - This feature is activated by a switch located on the side console. The switch has three positions, ON, OFF and BILGE. If the boat is going to sit for more than a few days with the bilge pumps on, it is important the switch is set in the BILGE position to minimize battery drain. This will activate the bilge pump and shut off power to the Serial Switching and Keyless Ignition System. It is important to remember the engine or other accessories can not be used unless the switch is in the ON position.

 

All On

Bilge

Bilge

 

 

Pump

Pump

All Off

Circuit

 

 

Indicator

Breaker

Bilge Pump On

CORC024

A circuit breaker and indicator light is located with the switch for the bilge pump. The circuit breaker is only active when the switch is in the BILGE position. The indicator light will come on anytime the bilge pump is activated.

4-44

Correct Craft, Inc.