CHAPTER 5 ND-71548 (E)
Page 382
Issue 2
INSTALLATION TEST PROCEDURE
NAP-200-056
Sheet 3/3
PHC Connection Test
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
The following explains how to solve the problems. When the problem can not be solved by the step, go to
the next step.
1) Remove and insert the circuit card.
2) Make sure office data and mount location data by using ARTD/ARTI/ATRK/DLEN.
3) Initialize the circuit card.
4) Re-download the firmware into the circuit card by using CD.
5) Replace the circuit card.
[4] Is the speech available ?
[5] Perform the above procedures between an analog terminal (or IP Enabled Dterm) and an analog terminal
via MC if necessary.
YES
NO
A
END