CHAPTER 3 ND-71548 (E)
Page 56
Issue 2
INSTALLATION PROCEDURE
3. PROCEDURE FOR FANU ON THE TOPU
When any IMG is configured by two PIMs or less, the FANU is mounted as shown in Figure 005-3. Because the
FANU is already mounted on the TOPU of the cabinet, perform STEP 4 through STEP 7 only, excepting a special
case (STEP 1 through STEP 3 are not required in the normal cases).
STEP 1: Referring to Figure 005-3, mount the three FANs onto the FAN Mounting Plate. Then, fasten every
four screws.
STEP 2: Accommodate the FAN Mounting Plate (tipped with three FANs) onto the TOPU.
Then, tighten the four screws (refer to Figure 005-3).
STEP 3: Mount the PZ-M369 onto the TOPU. Then, fasten the two screws (also refer to Figure 005-3).
Figure 005-3 Mounting of FANU (on TOPU)
NAP-200-005
Sheet 3/18
Mounting of Units and Modules
TOPU
PZ-M369
(TALM)
FAN Mounting Plate
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required