Connect the included remote control cable to the remote control unit's "REMOTE CONTROL" terminal.
When the cable is connected, the mode automatically switches to wired remote control.
When the wired remote control mode is used, the remote control unit can be operated even if no batteries are loaded.
*Use the remote controller within a distance of about 7 m
/ 23ft. from the front of the monitor's remote control sen- sor and at a horizontal angle of within 30°.
*The remote control operation may not function if the monitor's remote control sensor is exposed to direct sun- light or strong artificial light, or if there is an obstacle between the sensor and the remote control unit.
| SPEAKERS MUST |
|
|
| |
| HAVE MORE THAN |
|
|
| |
| 7WATT RATING |
|
|
| |
| IMPEDANCE 6 OHM |
|
|
| |
| LEFT |
|
|
|
|
| RIGHT |
|
|
| |
| EXTERNAL |
|
|
| |
| CONTROL |
|
|
| |
| REMOTE |
|
|
| |
| CONTROL |
|
|
| |
| CONTROL |
|
|
| |
| LOCK |
|
|
|
|
| ON/ | OFF |
|
|
|
|
|
|
| POWER/STANDBY |
|
|
| VOLUME | INPUT SELECT |
|
|
|
| DOWN UP LEFT/– RIGHT/+ | /EXIT |
|
|
| AC IN |
|
|
| |
| EXTERNAL |
|
|
| |
| CONTROL |
|
|
| |
|
|
| Approx. |
|
|
|
|
| 7m/ 23ft | 30˚ | 30˚ |
Remote Control Cable |
|
|
| ||
REMOTE |
|
|
| ||
|
|
|
| ||
| CONTROL |
|
|
| |
| CONTROL |
|
|
| |
To Remote Jack | LOCK |
|
|
| |
ON/ | OFF |
|
|
| |
|
|
|
| ||
• Do not drop or mishandle the remote control unit.
• Do not get the remote control unit wet. If the remote gets wet, wipe it dry immediately.
• Avoid heat and humidity.
• When not using the remote control unit for a long pe- riod, remove the batteries.
• Do not use new and old batteries together, or use different types together.
• Do not take apart the batteries, heat them, or throw them into a fire.
• When using the remote control unit in the wireless con- dition, be sure to unplug the remote cable from the REMOTE CONTROL terminal on the monitor.
7