Basic Operations
POWER
To turn the unit ON and OFF:
1.Plug the power cord into an active AC power outlet.
2.Press the POWER ON button (on the remote control- ler) to turn on.
The monitor’s POWER/STANDBY indicator will light up(green) when the unit is on.
3.Press the POWER OFF button (on the remote control- ler or the unit) to turn off.
The monitor’s POWER/STANDBY indicator turns red and the standby mode is set (only when turning off the unit with the remote control).
VOLUME
To adjust the volume:
1.Press and hold the VOLUME ▲ button (on the remote controller or the unit) to increase to the desired level.
2.Press and hold the VOLUME ▼ button (on the remote controller or the unit) to decrease to the desired level.
MUTE
To cancel the sound:
Press the MUTE button on the remote controller to cancel sound; press again to restore.
DISPLAY
To check the settings:
1.The screen changes each time the DISPLAY button is pressed.
2.If the button is not pressed for approximately three sec- onds, the menu turns off.
DIGITAL ZOOM
Digital zoom specifies the picture position and enlarges the picture.
1. Press the pointer button to display the pointer. ( )
To change the size of the picture:
Press the ZOOM+ button and enlarge the picture.
The pointer will change to resemble a magnifying glass. ( )
A press of the ZOOM- button will reduce the picture and return it to its original size.
To change the picture position:
Select the position with the ▲▼ buttons.
2. Press the pointer button to delete the pointer.
12