NEC 78K/0 Series - page 25

25

CHAPTER 3 ADDRESSING

User's Manual U12326EJ4V0UM

3.2.2 Register addressing

[Function]

Register addressing accesses a general-purpose register as an operand. The general-purpose register to

be accessed is specified by the register bank selection flags (RBS0 and RBS1) and the register specification

codes (Rn and RPn) in the instruction codes.

Register addressing is carried out when an instruction with the following operand format is executed. When

an 8-bit register is specified, one of the eight registers is specified by 3 bits in the instruction code.

[Operand format]

Identifier Description

r X, A, C, B, E, D, L, H

rp AX, BC, DE, HL

‘r’ and ‘rp’ can be described with absolute names (R0 to R7 and RP0 to RP3) as well as function names

(X, A, C, B, E, D, L, H, AX, BC, DE and HL).

[Description example]

MOV A, C; When selecting the C register for r

Instruction code 01100010

INCW DE; When selecting the DE register pair for rp

Instruction code 10000100

Register specification code

Register specification code

Contents

Main Page IEBus is a trademark of NEC Corporation. NOTES FOR CMOS DEVICES 4 Regional Information NEC Electronics Hong Kong Ltd. Device availability Ordering information Product release schedule Page INTRODUCTION Page Page Page Page Page 1.7 Special Function Register (SFR) Area 1.8 External Memory Space 1.9 IEBusTM Register Area 14 CHAPTER 2 REGISTERS 2.1 Control Registers Page Figure 2-5. Data to Be Reset from Stack Memory 2.2 General-Purpose Registers CHAPTER 2 REGISTERS Figure 2-6. General-Purpose Register Configuration (a) Absolute names (b) Functional names 2.3 Special Function Registers (SFRs) 20 CHAPTER 3 ADDRESSING 3.1 Instruction Address Addressing Page Page Page 3.2 Operand Address Addressing Page Page Page Page Page Page Page 32 CHAPTER 4 INSTRUCTION SET 4.1 Operation Page Page CHAPTER 4 INSTRUCTION SET Note Except r = A. CHAPTER 4 INSTRUCTION SET Note Only when rp = BC, DE or HL. (2) 16-bit instructions MOVW, XCHW, ADDW, SUBW, CMPW, PUSH, POP, INCW, DECW (3) Bit manipulation instructions MOV1, AND1, OR1, XOR1, SET1, CLR1, NOT1, BT, BF, BTCLR Page 4.2 Instruction Codes 4.2.2 Instruction code list Notes 1. Only when rp = BC, DE or HL. 2. Except r = A. Page Page Page Page Page Page Page Page MOV XCH Page MOVW XCHW Page ADD ADDC SUB SUBC AND OR XOR CMP Page ADDW SUBW CMPW Page MULU DIVUW Page INC DEC INCW DECW Page ROR ROL RORC ROLC ROR4 ROL4 Page ADJBA ADJBS Page MOV1 AND1 OR1 XOR1 SET1 CLR1 NOT1 Page CALL CALLF CALLT BRK RET RETI RETB Page PUSH POP MOVW SP , src MOVW AX, SP Page BR Page BC BNC BZ BNZ BT BF BTCLR DBNZ Page SEL RBn NOP EI DI HALT STOP APPENDIX A REVISION HISTORY 124 APPENDIX B INSTRUCTION INDEX (MNEMONIC: BY FUNCTION) Page 126 APPENDIX C INSTRUCTION INDEX (MNEMONIC: IN ALPHABETICAL ORDER) Page Page Facsimile Message Thank you for your kind support. From: