E – 19
C CARD
PC CONTROL
VIDEO DVI-D
USB
S-VIDEO AUDIO
M
E
N
U
E
N
T
E
R
C
A
N
C
E
L
SELECT
POWER
STATUS
ON
/
STAND BY
SOURCE
AUTO
ADJUST
PC CARD
ACCESS
AC IN
EO DVI-D
S-VIDEO AUDIO
DVI AUDIO
M
E
N
U
E
N
T
E
R
C
A
N
C
E
L
SELECT
POWER
STATUS
ON
/
STAND BY
SOURCE
AUTO
ADJUST
PC CARD
ACCESS
AC IN
C CARD
PC CONTROL
VIDEO RGB
USB
S-VIDEOAUDIO
RGB
S-VIDEO AUDIO
DEO
RGB INPUT AUDIO
Audio cable (not supplied)
Connecting Your PC
Connecting your PC to your MultiSync LT155 (XGA)/ LT154 (XGA) projector will enable you to project your computer’s screen image for an
impressive presentation.
To connect to a PC, simply:
1.Turn off the power to your projector and computer.
2.Use the supplied signal cable to connect your PC to the projector.
3.Turn on the projector and the computer.
4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected to the
projector.
RGB signal cable (supplied)
To mini D-Sub 15-pin connector on the
projector. It is recommended that you
use a commercially available
distribution amplifier if connecting a
signal cable longer than the supplied
one.
Audio cable (not supplied)
DVI-D – DVI-D signal cable
(supplied)
To DVI connector on the projector.
DVI-A – VGA adapter
(supplied)
IBM VGA or Compatibles
IBM VGA or Compatibles
Connecting Your PC with a DVI Connector
You can connect your PC with a DVI output to your MultiSync LT156 (XGA) projector.
When connecting a PC with a D-sub 15 pin analog connector, attach the supplied DVI-A – VGA adapter to the D-sub 15 pin connector of your PC.
To connect to a PC, simply:
1.Turn off the power to your projector and computer.
2.① Use the supplied DVI-D--DVI-D signal cable to connect a DVI connector of your PC to the projector.
➁ To connect a PC with a mini D-sub 15 pin- mini D-sub 15 pin connector, attach the supplied DVI-A – VGA adapter to the DVI connector on the
projector.
3.Turn on the projector and the computer.
4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected to the
projector.
Mini D-Sub 15 pin connector
LT155/LT154
LT156
DVI connector ①
Mini D-Sub 15
pin connector ➁
RGB signal cable (supplied)
To mini D-Sub 15-pin connector on the projector. It is
recommended that you use a commercially available dis-
tribution amplifier if connecting a signal cable longer than
the supplied one.
Connection Option ① when using DVI output.
Connection Option ➁ when using mini D-Sub 15 pin output.