NEAX2400 IPX ISDN Features and Specifications
Page 116 NDA-24311, Issue 1
S-83 Station Message Detail Recording - PRI
Service Conditions (cont’d)
8. If the distance between the system and the processing computer exceeds 50 feet (15 meters), an
asynchronous-type modem should be used.
9. RS232C Interface specifications:
Synchronization: Asynchronous
Data Speed: 9600 bps max.
Code: ASCII 7-bit + parity bit
Maximum Distance: 50 ft. (15m) without modem
10. NEAX/ASTRA CCS [N-11], NEAX/ASTRA CCS - PRI [N-23] feature provides for collection, storage,
analysis and processing of SMDR information on premises. Detailed and extensive management reports
are made readily available to the use r.
11. The figure at the end of this feature illustrates a typical SMDR/ASTRA arrangement.
12. The NEAX2400 IPX can accommodate up to 7 active ports or 4 redundant ports. Additional hardware is
required.
13. Supervision on the status of the external RS232C termi na l is not performed.
14. SMDR for the ATTENDANT CONSOLE [A-3] starts at the Attendant’s answer and is completed by the
Attendant's release.
15. FORCED ACCOUNT CODE [F-7] can be recorded on SMDR, for INWATS and CO incoming calls,
when used in conjunction with the REMOTE ACCESS TO SYSTEM [R-2] service feature.
16. FORCED ACCOUNT CODE [F-7] cannot be registered on SMDR if the incoming REMOTE ACCESS
TO SYSTEM [R-2] calls are terminated to stations via night service or DID.
17. For REMOTE ACCESS TO SYSTEM [R-2] tandem connections, the FORCED ACCOUNT CODE [F-7]
is registered for outgoing trunks only.
18. Data rate output is 30, 600, 1200, 2400, 4800, 9600 bps asynchronous ASCII (switch-select).
19. A maximum of 28,000 simultaneous calls can be stored in the system memory (active calls). When a call
is completed, the record is sent to the output device and is removed from memory.
20. If an overflow of active calls occurs, calls are al l o wed to complete and are not recorded.
21. CALL TRANSFER - ALL CALLS [C-11]: The fi rst or last station (syste m option) on the call is the
number recorded in the called number field. Also available as a system opt ion is the provis ion of a separat e
call record for each station.
22. CALL FORWARDING - INTERCEPT/ANNOUNCEMENT - ATTENDANT [C-75]: The called
telephone number is recorded for Attend ant-assisted incoming calls.
23. ATTENDANT-CONTROLLED CONFERENCE [A-2]: If the Attendant adds a trunk to the conference,
the Attendant conference line terminal is recorded.
24. LEAST COST ROUTING - 3/6-DIGIT - PRI [L-31]: Th e calling party can dial an SMDR account code
before the LCR access code. The called number is recorded (as modified for sending).
25. If an ACCOUNT CODE [A-18] is dialed, the maximum d igits of the called number is 22.
26. CALL FORWARDING - BUSY LINE [C-2], CALL FORWARDING - DON'T ANSWER [C-3], CALL
FORWARDING - ALL CALLS [C-5]: The forwarded to s tation is the number record ed in the called
number field.
27. CALL PICKUP - GROUP [C-7]: The station picking up the call is the number recorded in the called
number field.
28. CENTRALIZED ATTENDANT SERVICE (CAS) [C-20]: The SMDR record is provided for calls
extended outward by a CAS Attendant.