5-3
NOTE: You can also use the
왗
and
왘
button on the remote control to
select folders or slides.
If you use the
왗
and
왘
button on the remote control for Viewer
operation, press the PJ button to switch to the Projector mode and
the PJ button lights red.
Works as the Select button
on the projector.
Auto Play Mode
If the "Auto Play" option is selected in "Viewer Options" of the
menu, any given slide will start to play automatically.
You can also specify Auto Play Interval between 5 and 300 sec-
onds.
Switching to Slides Directly from Other Input
Modes
With this function it is possible to switch directly to a slide when
the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination
of slides and moving pictures from a VCR, etc., it is possible to
switch from a Viewer slide to the video picture then back to the
Viewer slide simply by using the Viewer button.
NOTE: Even if you switch the current Viewer source to another source,
the current slide is retained. When you return back to the Viewer, you
will get the slide that has been retained.
The PC card editing operation cannot be performed from the
projector. Do so using the Dynamic Image Utility 2.0 software.
Viewing Digital Images
Digital images can be played with the Viewer if the following
conditions are met:
• If the image can be stored on an MS-DOS format PC card
• If the image can be stored in a format supported by the Viewer.
With the Viewer, images on the card are searched for in direc-
tories and images in JPEG or BMP format are recognized as
slides. Searchable directories are directories within two steps
from the root directory, and searchable images are images
within the first 12 files in the directory. Only file and slide switch-
ing are possible.
NOTE: The maximum number of images recognized as slides within
one directory is 128.
Storing Images Displayed on the Projector on the
PC card (Capture)
The Capture features allows you to capture an image from a
source that is currently being displayed. The image is saved as
JPEG in the PC card. When you select Capture from the menu,
you will get a tool bar. You can capture an image directly using
the tool bar when the menu is not displayed.
NOTE:
* Unless a PC card is inserted into the PC Card slot of the projector,
the Capture feature is not available.
* The "Card Error" display means that the free space of the PC card
is insufficient for saving images. Make more space available on
the card by erasing unwanted images with your PC. The number
of images that can be captured depends on the size of the PC card.
* Be sure not to turn off the power or remove the PC card while
capturing an image. Doing so could cause a loss of the data in the
PC card or damage to the card itself.
Preparations:
Insert the PC card into the card slot.
Insert the PC card so that the end with the insertion direction
arrow on the top goes in first.
* Press the eject button to eject the card.
1.Project the image you wish to store on the projector.
2.Select the "Capture" from the Tools menu.
3.A tool bar will appear.
Lit red
E
N
T
E
R
C
A
N
C
E
L
SELECT
PJ
Drag
Freeze
Exit
Capture
Drive
The tool bar includes the following buttons:
Drag ............Drags to move the tool bar by clicking on the
blue part (for USB mouse operation only).
Capture .......Captures an image and save it as a JPEG file
on a PC card.
Freeze .........Freezes and unfreezes images.
Drive............ Switches between PC Card slot or USB memory.
Exit .............. Exits the Capture function. Another option to exit
the Capture function is to press MENU or CAN-
CEL button on the remote control or projector
cabinet.
5. Using the Viewer