START TO USE THIS PLAYER

-8-

POWER ON THE PLAYER AND TV

1.Connect this player with your TV / PC Monitor / Projector, amplifier (if available) and power source.

2.Turn on this player by click the power button on the front panel.

3.Turn on TV and switch it to the appropriate video mode ( composite video input, S-video input or component video input ).

4.If you connect the TV via component video input and get no image on the TV screen, please press “P-SCAN” button on the remote control a couple times until the TV shows image.

5.If you get black/white image on the TV screen, click “PAL/NTSC” button on the remote control to switch the player to the appropriate TV system ( PAL or NTSC).

6.You should be able to see the welcome screen on the TV by now.

ENTER SETUP MENU

1.Click “SETUP” button on the remote control.

2.You will see the general setup page show up on the screen.

--- General Setup Page ---

TV Display

PS

Angle Mark

On

OSDLang

Eng

Captions

Off

Screen Saver

On

Last Memory

Off