OTHERS

-21-

USEFUL NOTES

In order to prolong the service life of your player, it is recommend to wait at least 30 seconds before you turn it on again after switching it off.

Turn off power after operation.

Only use the power supply of the nominal voltage, otherwise the player will not be operational or even be damaged.

In case of occasional player halt, please turn it off and turn it on again.

Don’t turn off this player while it is still showing “loading” on the display.

TROUBLESHOOTING

Symptom

Cause

Solutions

 

 

 

No sound

Signal not properly connected

Connect signal securely.

 

Disc warped or dirty.

Clean your disc.

 

Player in mute status.

Press MUTE button again.

No picture

Signal not properly connected.

Connect signal securely.

 

 

TV not set for proper system.

Reset the AV/TV status of your TV set.

No color

TV system not right.

Press PAL/NTSC button.

 

TV set color not properly adjusted.

Adjust color of the TV set.

No disc reading

No disc in the player.

Load a disc.

 

 

Disc not properly loaded.

Reloaded a disc, with the label side facing up.

 

Condensation on the laser head.

Turn on the player, unload the disc and leave it on

 

 

for about an hour.

Remote control

Remote control not pointing to the sensor

Use the remote control properly.

window.

 

failure

 

Remote control’s operating distance more

Use the remote control within 8 meters range.

 

 

than 8 meters away from the TV.

Replace the batteries.

 

Batteries low.

 

Temporary function

Mal-fabricated disc used.

Wait 5-10 secs and the player will return to normal.

failure

Wrong buttons pressed.

Operate once more.

Static leakage into the player from outside.

Turn off the player for 1 to 2 mins, turn it on again.

 

 

TV set not properly adjusted.

 

Picture rolling

 

Re-adjust system of the TV set.