NETGEAR ip vrrp track ip route

Routing Commands
253
ProSafe M4100 and M7100 Managed Switches
decrement) for each downed interface. The default priority decrement is changed using the
<priority> argument. The default priority of the virtual router is 100, and the default
decrement priority is 10. By default, no interface are tracked. If you specify just the interface
to be tracked, without giving the optional priority, the default priority will be set. The default
priority decrement is 10.
Default
Format ip vrrp <vrid> track interface <slot/port> [decrement <priority>]
Mode
no ip vrrp track interface
Use this command to remove the interface from the tracked list or to restore the priority
decrement to its default.
Format no ip vrrp <vrid> track interface <slot/port> [decrement]
Mode
ip vrrp track ip route
Use this command to track the route reachability. When the tracked route is deleted, the
priority of the VRRP router will be decremented by the value specified in the <priority>
argument. When the tracked route is added, the priority will be incremented by the same.
A VRRP configured interface can track more than one route. When a tracked route goes
down, then the priority of the router will be decreased by 10 (the default priority decrement)
for each downed route. By default no routes are tracked. If you specify just the route to be
tracked, without giving the optional priority, the default priority will be set. The default priority
decrement is 10. The default priority decrement is changed using the <priority> argument.
Default
Format ip vrrp <vrid> track ip route <ip-address/prefix-length> [decrement
<priority>]
Mode
no ip vrrp track ip route
Use this command to remove the route from the tracked list or to restore the priority
decrement to its default. When removing a tracked IP route from the tracked list, the priority
should be incremented by the decrement value if the route is not reachable.
Format no ip vrrp <vrid> track ip route <ip-address/prefix-length>
[decrement]
Mode
priority: 10
Interface Config
Interface Config
priority: 10
Interface Config
Interface Config