NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Create LAN WAN Inbound Service Rules, 141

ProSecure Unified Threat Management (UTM) Appliance

Figure 68.

2.Enter the settings as explained in Table 27 on page 130.

3.Click Apply to save your changes. The new rule is now added to the Outbound Services table.

Create LAN WAN Inbound Service Rules

The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is blocked. Remember that allowing inbound services opens potential security holes in your firewall. Enable only those ports that are necessary for your network.

To create an inbound LAN WAN service rule:

1.In the LAN WAN Rules screen, click the Add table button under the Inbound Services table. The Add LAN WAN Inbound Service screen displays:

Firewall Protection

141