3Display the Custom Setting Bank menu

Press the multi selector to the right to enter the custom settings menu, then press the multi selector up or down to highlight F0 Custom Setting Bank. Press the multi selector to the right to display the menu shown below.

CSM MENU

F0 Custom

Setting Bank

 

Bank A

OK

Bank B

 

Bank C

 

Bank D

 

4Choose a custom settings bank

Press the multi selector up or down to highlight the desired settings bank, then press the multi selector to the right to put your choice into effect and return to the custom settings menu.

Settings stored in the selected bank will automatically be put into effect when the bank is chosen. Any changes to custom settings made after the bank is selected will be saved in the selected bank.

Using the Function Button to Adjust Custom Settings

If CSM is selected in the Assign FUNC sub-menu, the button can be used to select the custom settings bank. Keep-

ing the button pressed, rotate the main command dial until custom setting 0 appears in the rear control panel. The currently selected bank will be displayed following the custom settings number. To select a new settings bank, rotate the sub-

command dial while pressing the button. Release the button to put your selection into effect.

For more information on:

pg. 116 The Assign FUNC sub-menu

SETTINGS OMCUST—MENUS OTHER AND SETTINGS CUSTOM

157