.3

Adjust sensitivity (ISO equivalency) ( pp. 62–63)

1

Holding the ISO button down (A), turn the main command dial (B) until 125

 

is shown in the top and the rear control panel (C). This sets the sensitivity (the

 

digital equivalent of film speed) to a value roughly equivalent to ISO 125.

 

A

B

C

.4

Choose a white-balance setting (

pp. 64–69)

1

Holding the

button down (A), turn the main command dial (B) until A

 

(auto white balance) is shown in the rear control panel (C). At this setting, the

 

camera will automatically adjust white balance to produce good results for

 

most common light sources.

 

 

A

B

C

.5

Choose a focus mode ( pp. 70–71)

1

Turn the focus-mode selector until it clicks into place

pointing to S (single-servo autofocus). The camera will automatically focus on the subject in the selected focus area when the shutter-release button is pressed halfway. Photographs can only be taken when the camera is in focus. Do not attempt to adjust focus using the lens focusing ring.

1 STEP

—TUTORIAL

OGRAPHSTPHO AKINGT

39