If the card contains multiple images, you may find it convenient to select the image you wish to view from a menu of thumbnail images, rather than scrolling through the photos one frame at a time. Turn the main command dial

while holding down thebutton to cycle through views as follows: single- frame ↔ four-thumbnail display ↔ nine-thumbnail display ↔ single-frame.

.3

Zoom in on the selected photograph

6

To zoom in on the selected thumbnail or on the photograph displayed in

 

single-frame review, press the

button (A). The center portion of the

photograph will be enlarged to fill the monitor (B).

To view other areas of the photo, press the multi selector. To cancel zoom and

return to normal review, press the button a second time. Note that Custom Setting 36 must be set to 1 to enable zooming and that in this case, the buffer memory size is reduced by one-third.

A

B

➔

For approximately two seconds after you press the button to zoom in on the image, or after you press the multi selector to scroll the image, a thumbnail showing your current position in the image will appear in the bottom right corner of the display.

6 STEP

—TUTORIAL

OGRAPHSTPHO AKINGT

49