185
n
Storage: To prevent mold or mildew, store the camera in a dry, well-ventilated area.
If you are
using an AC adapter, unplug the adapter to prevent fire.
If the product will not be used for an
extended period, remove the battery to prevent leakage and store the camera in a plastic bag
containing a desiccant.
Do not, however, store the camera case in a plastic bag, as this may
cause the material to deteriorate.
Note that desiccant gradually loses its capacity to absorb
moisture and should be replaced at regular intervals.
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the
camera on and release the shutter a few times before putting it away.
Store the battery in a cool, dry place.
Replace the terminal cover before putting the battery
away.
Notes on the monitor: The monitor is constructed with extremely high precision; at least 99.99% of
pixels are effective, with no more than 0.01% being missing or defective.
Hence while these
displays may contain pixels that are always lit (white, red, blue, or green) or always off (black),
this is not a malfunction and has no effect on images recorded with the device.
Images in the monitor may be difficult to see in a bright light.
Do not apply pressure to the monitor, as this could cause damage or malfunction.
Dust or lint
on the monitor can be removed with a blower.
Stains can be removed by wiping lightly with a
soft cloth or chamois leather.
Should the monitor break, care should be taken to avoid injury
from broken glass and to prevent liquid crystal from the monitor touching the skin or entering
the eyes and mouth.
Moiré: Moiré is an interference pattern created by the interaction of an image containing a
regular, repeating grid, such as the pattern of weave in cloth or windows in a building, with the
camera image sensor grid.
If you notice moiré in your photographs, try changing the distance
to the subject, zooming in and out, or changing the angle between the subject and the
camera.
Caring for the Battery
Batteries may leak or explode if improperly handled.
Observe the following precautions when
handling batteries:
•Use only batteries approved for use in this equipment.
•Do not expose the battery to flame or excessive heat.
•Keep the battery terminals clean.
•Turn the product off before replacing the battery.
•Remove the battery from the camera or charger when not in use and replace the terminal
cover.
These devices draw minute amounts of charge even when off and could draw the
battery down to the point that it will no longer function.
If the battery will not be used for
some time, insert it in the camera and run it flat before removing it and storing it in a location
with an ambient temperature of 15 to 25°C (59 to 77 °F; avoid hot or extremely cold
locations).
Repeat this process at least once every six months.
•Turning the camera on and off repeatedly when the battery is fully discharged will shorten
battery life.
Batteries that have been fully discharged must be charged before use.