3Tap the shutter icon.
The shutter will be released after you remove your finger from the icon; the resulting photo is first saved to the cam- era memory card and then downloaded to the smart device. There is no need to point the smart device at the camera.
D Remote Photography
Remote photography ends automatically when the battery in the camera or smart device runs low. Note that using remote photography for an extended period may cause the camera’s internal temperature to rise; if necessary, remote photography will end automatically to minimize damage to camera circuits.
The smart device can not be used to adjust camera settings; use camera controls to adjust settings before starting Step 1. Regardless of the release mode selected with the camera, only one picture will be taken each time you tap the shutter icon. Note that the display may not update smoothly depending on the device and network conditions.
A shutter speed of “Time” is available in mode M. Choose a shutter speed of Aon the camera and select remote photography mode on the smart device, then tap the shutter icon to open the shutter. Shooting ends when the icon is tapped again. Note that the smart device will not display the view through the camera lens at a shutter speed of “Bulb”, and that the smart device can not be used in shooting mode when “Time” is selected.
| A | 7 |