Flicker or banding appears in movies or in the displays: Choose a Flicker reduction setting that matches the local AC power supply (0 157).
Optional flash units do not fire: The camera is in Smart Photo Selector or Motion Snapshot mode or is recording a movie, or Electronic (Hi) is selected for Shutter type (0 27).
Menu items are unavailable: Some options are only available in particular shooting or exposure modes (0 173) or when a flash or GPS unit is attached (0 59, 66).
Shooting (P, S, A, and M Modes)
The shutter release is disabled: You selected S
Some shutter speeds are not available: You are using a flash (0 64).
Colors are unnatural:
•Adjust white balance to match the light source (0 126).
•Adjust Picture Control settings (0 132).
Cannot measure white balance: The subject is too dark or too bright (0 129).
Picture Controls produce varying results: A (auto) is selected for sharpening, contrast, or saturation. For consistent results over a series of photos, choose another setting (0 134).
Picture Control brightness and contrast can not be adjusted: Active
Metering can not be changed: Exposure lock is in effect (0 125).
Noise (reddish areas and other artifacts) appears in long
Movies
Cannot record movies: The
No sound is recorded for movies:
•Microphone off is selected for Movie sound options > Microphone (0 141).
•Live audio is not recorded with
184