ATraffic Level

The traffic on each channel can be gauged by pressing 2 for about a sec- ond. The traffic level for each channel is shown by an icon; choosing a low- traffic channel improves performance. Note that the display varies depending on when it was last updated; when multiple WR-1 units are used, their displays will not necessarily show the same traffic levels.

(No icon)

Heavy

No traffic

traffic

AErasing Pairing Data

Selecting DELETE in the WR-1 PAIRING menu lists the devices with which the unit is paired, identified by the last three digits of their serial numbers. Highlight a device and press z. A confirmation dialog will be displayed; highlight YES and press z to erase the pairing data for the selected device.

AID Mode

In ID mode, connections between WR-1 units can be established based on the unit name rather than device pairing (0 23).

AThe Fn Button

The transmitter Fn button performs the same function as the Fn button on the camera to which the receiver is connected (D4, D800/800E, D7100, and D5200 cameras only; for the latest information on supported cameras, visit the websites listed on page viii). For more infor- mation, see the camera manual.

ADevice Selection

To control a specific receiver, press the SEL button on the transmitter and highlight the receiver in the device selection menu.

11