Niles Audio A4.6Ci

100

A4.6Ci SYSTEM ACCESSORIES

AC-3 Voltage-Triggered AC Power Strip

STOCK #

FG00242

AC power strip with two voltage-triggered AC outlets and

one unswitched AC Outlet.

12V DC/200mA Wall Adapter

STOCK #

FG00665

Provides a 12V DC sync signal to the IntelliControl®when

plugged into a component’s switched outlet.

OTI-512 Opto-Isolated Voltage Trigger

STOCK #

FG00319

Converts any voltage between 3V and 30V (AC or DC) to

12V DC sync. Useful in combination with an accessory

cable with Proceed™, Fosgate™, Citation™, and Synthesis™

preamps.

10’ Mini-plug to Mini-Plug Accessory Cable

STOCK #

FG00933

• 10' 3.5mm mono mini to 3.5mm mono mini-cable.

• Used to send sync signals to the 12V sync inputs of

the IntelliControl®. Connects with a 3.5mm mono mini-

plug to 3.5mm.

Sync Accessories

Many of the components in your system should have their power status “synced” to the A4.6Ci. The following

accessories either sense that a component is on/off or actually turn the component(s) on/off.

APC-2 Current-Sensing Outlet Switcher

STOCK #

FG00254

Current sensing outlet. Provides 12V DC sync connection

via an accessory cable to the IntelliControl®.

IPC-6 Programmable AC Power Controller

LS-1 Light Sensor

SENSITIVITY

ADJUST

12V CONTROL

OUTPUT

SENSOR

LS-1 Light Sensor

MAXMIN

+12V DC

STOCK #

FG00272

STOCK #

FG00728

Six-outlet microprocessor controlled power management

system with on/off sequencing.

*Rack-mount panel available. Stock# FG00669

Senses the brightness of a component’s front-panel dis-

play and outputs a 12V DC sync signal when the display

is brightest.

10’ Bare Wire to Mini-Plug Accessory Cable

STOCK #

FG00724

• 10' bare wire to 3.5mm mono mini-cable.

• Used to send sync signals to the 12V sync inputs of

the IntelliControl®. Connects with a 3.5mm mono mini-

plug to 3.5mm.