TERMINATING FOUR-PAIR TWISTED CABLE
The Solo™and Select™Master Keypad Modules, the expander, and the A4.6Ci’s system-expansion connections
require a four-pair twisted cable with a one-to-one wiring configuration. To maintain consistency throughout
all Intellipad®Ci installations, we recommend the color-coding pattern described in Figure 31. However, you
may follow the color-coding pattern of your choice, as long as it is consistent throughout the system.
39
CONNECTIONS
1234
Pair 2
Pair 1
T568A
Pair 3 Pair 4
5678
1= Green/White
2= Green
3= Orange/White
4= Blue
5= Blue/White
6= Orange
7= Brown/White
8= Brown
Figure 31
Solo™
Master
Keypad Module
Numeric™
Accessory
Keypad Module
RJ-45 Connector for
connection to Master
Keypad Module
RJ-45 Connector
for connection to
Numeric™ Accessory
Keypad Module
RJ-45 Connector
for connection to
IR Sensors
RJ-45 Connector for
connection to
the ZR-4630
Included
Jumper Cable
IR SENSOR
INPUT
OUTPUT
SYSTEM
ACCESSORY
KEYPADS
Figure 32
Figure 33
CONNECTING
NUMERIC™KEYPADS
Each Solo™and Select™Master Keypad
Module can be mated with one
optional Numeric™Accessory Keypad
Module using an included jumper
cable (see Figure 33).
CONNECTING THE SOLO™AND SELECT™MASTER KEYPADS TO
THE HOME RUN OF FOUR-PAIR TWISTED CABLE
The home run of four-pair twisted cable is terminated with a male
RJ-45 connector and plugged into the rear-panel jack labeled SYS-
TEM on the Solo™and Select™Master Keypad Module (see Figure 32).