The R-4 Remote - The R-4 Remote provides system control via an ergonomic hand-held IR remote control.
Zones that have been installed with Niles IR Sensors can take advantage of the R-4 Remote, providing system
control from anywhere in the room.
System-Wide Operation
The ZR-4630 MultiZone Receiver incorporates system-wide control to activate all zones to a particular source
component. An ALL OFF command is also included for complete system shutdown from any zone in the system.
Paging Input for Telephone Systems
Apaging input is provided for telephone systems equipped with a paging output. Audio sensing is utilized to
detect the paging signal. Source components currently playing in the various zones are interrupted, enabling
the paging signal to play through. If a zone is off during a page, it turns on, enabling the paging signal to play
through. Front-panel switches are provided to disable this paging feature in any zones where it is not required.
12V Control Output
Acontrol output connector provides a constant 12V DC trigger signal the moment any zone is activated. This
signal can be interfaced to Voltage Triggered AC Power Strips (i.e., Niles AC-3) for the automation of source
components that can only be activated via switched AC outlets.
Expandable for Larger MultiZone Systems
Up to three ZR-4630’s can be combined in a single system, providing 18 zones. Source components are connect-
ed to all receivers, splitting their audio signals utilizing RCA Y-adapters or Niles AVDA-3 Distribution Amplifiers.
Program Memory Protection
The ZR-4630 MultiZone Receiver utilizes non-volatile memory for storage of its programming. This safeguards
against accidental loss of the programming for the entire life of the product.
8
FEATURES AND BENEFITS