Nilfisk-ALTO PS Series user manual - page 5

2. QUICK START- ACTIVE SPEAKER CABINET
3). Turnon your mixer first, then the active speaker cabinets.
-. ForActive Speaker Cabinets
QUICK START
PSActive Full-range Speakers
4
SignalCable
PowerCord
Tripod
Mount
MainMix
Left
Output
Mixer
Tripod
Mount
PowerCord
Right
Output
MainMix
SignalCable
Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned
completely down.
1). Connect one side of the signal cable at your audio mixer into output left /right (with Stereo-Jack or XLR) and
the other side of the cable into the line input (COMBO) of your active speaker cabinet (with Stereo-Jack or
XLR).
2). Connect the power cord to mains.
4). Turnup the volume control of the active speaker cabinets.
5). Use PFLfunction to get the proper input level for the mixer, and adjust the main mix level control to manipulate the
output level.
6).After using, turn off your active speaker cabinets first, then the mixer.