USER MANUAL

ENGLISH

TROUBLESHOOTING

Trouble

Possible cause

Remedy

 

 

 

 

The hood (13) is not properly closed.

Close the hood properly.

 

 

 

 

The engine oil level is too low.

Check that the engine oil level is within the limits (*).

 

 

 

The engine does not start with the ignition

The machine has run out of fuel.

Check that there is fuel in the tank (30).

key.

 

 

The fuel does not reach the carburettor.

Check that the fuel reaches the carburettor and that

 

 

the fuel filter is clean. (*)

 

 

 

 

 

 

The spark plug does not produce a spark.

Check that the spark plug produces a spark. (*)

 

 

 

 

The engine oil level is too low.

Check that the engine oil level is within the limits (*).

 

 

 

The engine stops during operation.

The machine is running out of fuel.

Check that there is fuel in the tank (30).

 

 

 

 

The fuel filter is dirty.

Clean the fuel filter. (*)

 

 

 

 

The vacuum system is turned off.

Turn on the vacuum system with the switch (56).

 

 

 

 

The dust filter is clogged.

Clean the dust filter.

 

 

 

The machine collects little debris/dust.

The hopper is full.

Empty the hopper (4).

 

 

The skirts are not integral or not properly

Check the skirts (16, 17, 18, 19) for integrity and

 

 

adjusted.

proper adjustment.

 

 

 

 

The broom height is not properly adjusted.

Adjust the height of the brooms (10, 11, 12).

 

 

 

 

The parking brake is engaged.

Check that the parking brake (84 and 76) has been

 

released.

 

 

When pressing the drive pedal, the

The hydraulic system oil level is incorrect.

Check the hydraulic system oil level in the tank (28).

machine does not move, or it moves

 

 

The centrifugal pulley does not operate

Check that the centrifugal pulley (petrol engine-drive

slowly.

 

properly.

pump coupling joint) operates properly. (**)

 

The drive pedal is not properly adjusted.

Adjust the drive pedal. (**)

 

 

 

The hopper does not lift.

The hydraulic system oil level is incorrect.

Check the hydraulic system oil level in the tank (41).

 

 

The F4 or F7 fuse is open.

Replace the fuse.

 

 

 

 

The hopper does not dump.

The F7 fuse is open.

Replace the fuse.

 

 

The hopper is not lifted enough.

Lift the hopper over 300 mm.

 

 

 

 

 

The hopper has not returned to horizontal

Turn the hopper to horizontal position.

 

position.

 

 

The hopper does not lower.

In case of particular weather conditions, the

Wait a few moments to let the hydraulic system oil

 

hydraulic system oil is slow in flowing through

 

flow.

 

the safety valve.

 

 

 

 

 

When the engine compartment hood (13)

The hood safety microswitch does not work.

Repair the microswitch. (**)

is open, the engine keeps running.

 

 

(*)For the relevant procedure, see the Petrol Engine Manual. (**) Procedure to be performed by Nilfisk Service Center.

For further information, refer to the Service Manual, available at any Nilfisk Service Center.

SR 1301 P

1463388000(1)2008-05 A

31

Page 97
Image 97
Nilfisk-ALTO SR 1301 P manuel dutilisation Troubleshooting, Trouble Possible cause Remedy

SR 1301 P specifications

Nilfisk-ALTO SR 1301 P is a highly efficient and versatile scrubber dryer designed for cleaning various types of surfaces in both commercial and industrial environments. This machine strikes a balance between robust performance and user-friendly capabilities, making it a preferred choice for professionals seeking reliability and effectiveness in their cleaning operations.

One of the main features of the Nilfisk-ALTO SR 1301 P is its compact design, allowing it to easily navigate tight spaces while still delivering powerful cleaning results. This maneuverability does not compromise its ability to cover larger areas, making it suitable for varied environments such as retail stores, warehouses, and schools. The machine is equipped with a robust cleaning mechanism, utilizing dual counter-rotating brushes that efficiently tackle dirt and grime on floors of all types.

The SR 1301 P boasts advanced technology that enhances its cleaning performance. The machine employs an innovative water management system, which optimizes water and detergent usage, ensuring thorough cleaning without excessive waste. This environmentally friendly approach not only conserves resources but also reduces operational costs.

Another significant characteristic of the Nilfisk-ALTO SR 1301 P is its intuitive control panel, which simplifies operation for users. Features such as variable brush pressure settings allow operators to adjust the cleaning intensity based on the specific surface conditions, ensuring effective cleaning tailored to the task at hand. Additionally, the integrated battery system provides cordless operation, offering uninterrupted cleaning cycles and greater flexibility in movement.

The machine's maintenance has also been thoughtfully designed. The removable tank facilitates easy cleaning and refilling, while the durable construction ensures prolonged lifespan and reliability under demanding conditions. This ease of maintenance aligns with the overall efficiency the SR 1301 P brings to cleaning routines.

With its combination of powerful performance, advanced technology, and ease of use, the Nilfisk-ALTO SR 1301 P stands out as an excellent choice for businesses aiming to maintain cleanliness with minimal effort. Its effective features are designed to boost productivity while delivering superb cleaning results across a wide range of surfaces. This scrubber dryer exemplifies a modern solution for demanding cleaning needs, proving that innovation and efficiency can go hand in hand.