Copyright © 2004 Nokia. All rights reserved.
Tools
80
To add a voice command to a profile, the Profiles folder must be opened and a specific
profile selected.
2The text Press ’Start’, then speak after tone is displayed.
•Press Start to record a voice command. The phone sounds a starting tone and the
note Speak now is displayed.
3Pronounce the voice command. The phone will stop recording after approximately 5
seconds.
4After recording, the phone plays the recorded command and the note Playing voice
command is displayed. If you do not want to save the recording, press Quit.
5When the voice command has been successfully saved, the note Voice command saved
is displayed and a beep sounds. A symbol can be seen next to the application.

Adding an application to the list

Assign voice commands to other applications that are not listed in the Voice commands
main view.
1In the Voice commands main view, select Options→ New application.
2Available applications are displayed. Scroll to the application that you want to add and
press Select.
3Add a voice command to the new application. See “Adding a voice command to an
application” on page79.
Starting an application using a voice command
1In standby mode, press and hold . A short tone is played and the note Speak now
is displayed.
2When you are starting an application by saying a voice command, hold the phone at a
short distance away from your mouth and pronounce the voice command clearly.
3The phone plays the original voice command and starts the application. If the phone
plays the wrong voice command, press Retry.