Preparation and Using
of Remote Control
Installation Steps
Follow the steps below to install the battery.
1.Pull the battery holder out from the remote control in the direction of the arrow.
2.Load a new battery properly with the (+) side up.
3.Insert the battery holder back into the remote control.
Use of Remote Control
Point the remote control unit from no more than about 5m from the remote control sensor and within about 60 degrees of the front of the unit.
Note
¾The battery will last for about 1 year under normal use (at room temperature).
¾Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or a fire. Battery leakage may damage the remote control.
¾Do not expose the remote control unit to direct sunlight.
¾Do not recharge, disassemble, deform or heat the battery.
¾Do not put the battery in fire or water.
¾Immediately replace the exhausted battery.
¾Take out battery when the remote is not in use for a long time.
14