Page 220 of 456 Cabling Common Equipment in a Multi Group system
Figure 91
CP PIV Core and Network backplanes
|
|
|
|
|
| NT4N89 cable |
|
|
|
|
|
|
|
| Network backplane |
|
| Core backplane |
| ||||
|
|
|
|
|
| A B | System Monitor |
|
|
|
|
|
| (XSM) connections | |
|
|
|
|
|
|
| J3 |
Group 7 | Group 6 | Group 5 | Group 4 | Group 3 | Group 2 | Group 1 | J2 J1 |
|
|
|
|
|
|
| |
j3 | j3 | j3 | j3 | j3 | j3 | j3 |
|
slot 12 | slot 12 | slot 11 | slot 11 | slot 10 | slot 10 | slot 9 |
|
port 1 | port 0 | port 1 | port 0 | port 1 | port 0 | port 1 |
|
j4 | j4 | j4 | j4 | j4 | j4 | j4 |
|
slot 12 | slot 12 | slot 11 | slot 11 | slot 10 | slot 10 | slot 9 |
|
port 1 | port 0 | port 1 | port 0 | port 1 | port 0 | port 1 |
|
NT4N29 cable |
|
|
|
|
| ||
|
| j3 slot 9 port 0 |
| j4 slot 9 port 0 |
| ||
|
|
| Group 0 |
| NT4N29 cable |
| |
|
|
|
|
|
| ||
|
|
|
|
|
| E | D |
|
|
|
|
|
|
| |
Installing the CP PIV to I/O panel cables
Connect the cables from the CP PIV card faceplate to the I/O panel on the back of the Core/Net modules:
•COM1 is used to connect a terminal.
•COM2 is used to connect a modem.
•LAN 1 is used to connect the system to a LAN switch.
•LAN 2 is used to connect Core 0 to Core 1 for system redundancy.
Note: If there is no LAN, LAN 1 and LAN 2 are connected from Core 0 to Core 1.This connection is made on the backplane.
