Page 448 of 910 Configuration of IP Telephony nodes using Element Manager
553-3001-365 Standard 4.00 August 2005
Configure Alarm Management to receive IP Line
SNMP traps
Alarm Management cannot be configured using Element Manager. OTM 2.2
must be used to configure the Alarm Management feature to receive IP Line
SNMP traps. See Procedure 68 on page 523.
Assemble and install an IP Phone
To assemble and install an IP Phone, refer to IP Phones: Description,
Installation, and Operation (553-3001-368).
Change the default IPL> CLI Shell password
The IPL> Command Line Interface (CLI) is password-protected to control
Telnet access and access to the local maintenance port. The same user name
and password also controls FTP access to the Voice Gateway Media Card.
The IPL> CLI has a default user name of itgadmin and a default password of
itgadmin.
The default user name and password must be changed as a preventative
security measure. See “IPL> CLI Shell user name and password” on page 539
and Procedure 69 on page 553.
Configure the IP Phone Installer Passwords
The IP Phone Installer Password, used when changing the TN on the
telephone, controls registration with a virtual line TN on the Call Server.
Refer to page 543 for more information about the IP Phone Installer
Passwords.
To enable and set the administrative IP Phone Installer Password, see
Procedure 69 on page 553.
If required, enable and configure a temporary IP Phone Installer Password.
See Procedure 70 on page 556.