Nortel Networks 10BASE-T manual Vlan Port Configuration screen opens Figure

Using the BayStack 410-24T 10BASE-T Switch

5.Select a priority level from the range shown in the Traffic Class Configuration screen (or modify the Traffic Class parameters to suit your needs).

6.Assign the priority level to ports using the VLAN Port Configuration screen:

a.Press [Ctrl]-R to return to the VLAN Configuration Menu.

b.From the VLAN Configuration Menu, select VLAN Port Configuration (or press c).

The VLAN Port Configuration screen opens (Figure 1-38).

Figure 1-38 shows the VLAN Port Configuration screen setup for port 4 in Figure 1-35 on page 1-59.

VLAN Port Configuration

Port:	[	4	]
Filter Tagged Frames:	[ No		]
Filter Untagged Frames:	[ No		]
Filter Unregistered Frames:	[ No		]
Port Name:	[ Luke’s port ]
PVID:	[	2	]
Port Priority:	[	6	]
Tagging:	[ Untagged Access ]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-38. Setting Port Priority Example

For more information about using this feature, see “VLAN Configuration Menu” on page 3-39.

1-62 309985-C Rev 00