703t server description

Standard 1.04

In the previous diagram, the telephony LAN (TLAN) provides IP connectivity between the Succession 1000 system and the i2004 Internet phonesets. The connection between the Call Server and Media Gateway can be point-to-point, or it can be through the LAN, if the system is installed in a distributed data network.

For information about the Succession 1000 system and i2004 Internet phoneset bandwidth and network requirements, refer to the Succession 1000 Planning and Installation Guide (553-3023-210).

Switch connectivity

For more details about how the 703t server and switch connection is established, refer to the switch and server setup document for your switch:

„Succession 1000 System and CallPilot Server Configuration (555-7101-510)

„Meridian 1 and CallPilot Server Configuration (555-7101-222)

LAN connectivity

The 703t server contains two Ethernet controllers on the motherboard that provide the following:

„10/100Base-T Ethernet network connectivity to the ELAN (Meridian 1 and Succession 1000 only)

For information about the ELAN’s purpose and requirements, see the Planning and Engineering Guide (555-7101-101).

„10/100/1000Base-T Ethernet connectivity to the CLAN

The CLAN is an optional connection that provides data connectivity among desktop and web messaging clients, administrative PCs, and the CallPilot server.

See “Rear panel diagram” on page 21 to identify the location of network interface connectors.

28

CallPilot

Page 28
Image 28
Nortel Networks 703t manual Switch connectivity, LAN connectivity