Nortel Networks NN47250-500 Displaying port information

Configuring and managing ports and VLANs 113
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Displaying port information
You can use CLI commands to display the following port information:
• Port configuration and status
• PoE state
• Port statistics
You also can configure WSS Software to display and regularly update port statistics in a separate window.
Displaying port configuration and status
To display port configuration and status information, use the following command:
show port status [port-list]
To display information for all ports, type the following command:
# show port status
In this example, three of the switch’s ports, 1, 5, and 6, have an operational status of up, indicating the links on
the ports are available. Ports 1 and 6 are network ports. Port 5 is an AP access port.
(For more information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series
Command Line Reference.)
Displaying PoE state
To display the PoE state of a port, use the following command:
show port poe [port-list]
To display PoE information for ports 2 and 4, type the following command:
Port Name Admin Oper Config Actual Type Media
1 1 up up auto 100/full network 10/100BaseTx
2 2 up down auto network 10/100BaseTx
3 3 up down auto network 10/100BaseTx
4 4 up down auto network 10/100BaseTx
5 5 up up auto 100/full ap 10/100BaseTx
6 6 up up auto 100/full network 10/100BaseTx
7 7 up down auto network no connector
8 8 up down auto network no connector