Configuring AAA for network users 597

Nortel WLAN—Security Switch 2300 Series Configuration Guide
start-date Date and time at which the
user becomes eligible to
access the network.
WSS Software does not
authenticate the user unless
the attempt to access the
network occurs at or after
the specified date and time,
but before the end-date (if
specified).
Date and time, in the following format:
YY/MM/DD-HH:MM
You can use start-date alone or with end-date.
You also can use start-date, end-date, or both in
conjunction with time-of-day.
time-of-day
(network access mode
only)
Day(s) and time(s) during
which the user is permitted
to log into the network.
After authorization, the
user’s session can last until
either the Time-Of-Day
range or the
Session-Timeout duration
(if set) expires, whichever
is shorter.
One of the following:
•never—Access is always denied.
•any—Access is always allowed.
•al—Access is always allowed.
• One or more ranges of values that consist of
one of the following day designations
(required), and a time range in hhmm-hhmm
4-digit 24-hour format (optional):
•mo—Monday
•tu—Tuesday
•we—Wednesday
•th—Thursday
•fr—Friday
•sa—Saturday
•su—Sunday
•wk—Any day between Monday and
Friday
Separate values or a series of ranges (except time
ranges) with commas (,) or a vertical bar (|). Do
not use spaces.
The maximum number of characters is 253.
For example, to allow access only on Tuesdays
and Thursdays between 10 a.m. and 4 p.m.,
specify the following:
time-of-day tu1000-1600,th1000-1600
To allow access only on weekdays between 9 a.m
and 5 p.m., and on Saturdays from 10 p.m. until
2 a.m., specify the following:
time-of-day wk0900-1700,sa2200-0200

Note: You can use time-of-day in

conjunction with start-date, end-date,

or both.

Table 38.Authentication attributes for local users (continued)

Attribute Description Valid Value(s)