Playing
Before playing
•
•When playing
•If an audio system is connected to the DVD Player, turn on the audio system and set it to the DVD Player’s input.
About the
VCD means the function or title is related to Video CD operation.
CD means the function or title is related to audio CD operation.
Warning
If the DVD Player is connected to the TV or amplifier through the analog audio jacks, do not play
To reproduce DTS surround sounds, digital connection to an amplifier with a DTS decoder is needed.
Basic Playback
1 Press | . | If the DVD Player is in standby mode |
when the button is pressed | ||
The disc tray opens. | The DVD Player turns on and the disc tray opens. | |
|
| In this case, it takes several seconds until the disc |
|
| tray opens. |
2 Place a disc on the disc tray.
Put the disc in the tray with the label side facing up.
There are two different disc sizes. Place the disc in the correct guide on the disc tray.
DISPLAY
OPEN/CLOSE
Whenever a disc is loaded in the player, indicators aboveand light up.
S TA N D B Y / O N |
|
|
|
|
VIDEO CIRCUIT |
|
|
|
|
OFF |
| DISPLAY |
|
|
|
|
|
| |
STANDBY |
| OPEN/CLOSE | STOP | PLAY |
|
|
|
| |
POWER |
|
|
|
|
48/44.1 | 96/88.2 | 192/176.4 |
|
|
ON OFF |
|
|
|
|
3 Press .
The disc tray closes and playback starts.
If you press | to close the tray after step 2, playback |
may automatically start depending on the disc.
The appropriate disc indicator lights, and the audio sampling rate indicator lights.
For the other information that appears in the display, see page 35.
DVD
48/44.1 96/88.2 192/176.4
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
20