Northern Industrial Tools 6821 ASSEMBL Y

To stop the tool from the locked position, pull the switch trig-

ger fully, then release it.

This tool has a reversing switch to change the direction of

rotation. Move the reversing switch lever to the position

(A side) for clockwise rotation or the position (B side) for

counterclockwise rotation.

CAUTION:

•Always check the direction of rotation before operation.

•Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotation before

the tool stops may damage the tool.

ASSEMBLY CAUTION:

•Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Pull the locator out of the locking sleeve while turning the

locator slightly. Then grasp the bit with a pair of pliers and

pull the bit out of the magnetic bit holder. Sometimes, it helps

to wiggle the bit with the pliers as you pull.

To install the bit, push the bit firmly into the magnetic bit

holder. Then install the locator by pushing it firmly onto the

locking sleeve while turning the locator slightly.

1. Reversing switch lever

002634

1. Locator

2. Locking sleeve

002652

1. Bit

2. Magnetic bit holder

002660