Applicator Gun and Mixing Nozzle Guide
NORTON OFFERING PART 18 ELEMENT 24 ELEMENT PNEUMATIC GUN MANUAL GUN PNEUMATIC GUN
NUMBER SIZE MIXING NOZZLE MIXING NOZZLE 400 ML 400 ML 600 ML
#04627 #04628 #41396 #41398 #41397
Epoxy Panel Bonding Adhesive
04674
400ml
•••
Epoxy Rigid Repair Adhesive and Filler
04675
400ml
•••
Epoxy Flexible Repair Adhesive and Filler
04676
400ml
•••
Fiberglass Matting Adhesive
04680
400ml
•••
Urethene Adhesive – 3
04671
400ml
•••
Urethene Adhesive – 10
04672
400ml
•••
Urethene Adhesive – 35
04673
400ml
•••
Urethene Adhesive – 3
04677
600ml
••
Urethene Adhesive – 10
04678
600ml
••
Urethene Adhesive – 35
04679
600ml
••

Urethane Adhesives

Road Worthy, Shop Tested,

OEM Approved:

Truck Line Adhesives

SMC/FRP Fiberglass Repair and
Panel Bonding
400ml 1:1 Cartridge
PART OEM APPROVED CLAMPING OR SANDING OR
NUMBER PLIOGRIP® NO. OPEN TIME WORK TIME FIXTURE TIME PAINTING TIME
04671
7773 3 minutes 3-1/2 minutes 10 minutes 30 minutes
04672
7779 10 minutes 17 minutes 30 minutes 1 hour
04673
7770 35 minutes 50 minutes 1-1/2 hours 3 hours
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 18 ELEMENT MIXING NOZZLE #04627
600ml 1:1 Cartridge
PART OEM APPROVED CLAMPING OR SANDING OR
NUMBER PLIOGRIP® NO. OPEN TIME WORK TIME FIXTURE TIME PAINTING TIME
04677
7773 3 minutes 3-1/2 minutes 10 minutes 30 minutes
04678
7779 10 minutes 17 minutes 30 minutes 60 minutes
04679
7770 35 minutes 50 minutes 90 minutes 3 hours
USE APPLICATOR GUN #41397-PNEUMATIC. USE 18 ELEMENT MIXING NOZZLE #04627
Times will increase as
temperatures decrease.
Times shown above are
at 77f/25c.
Full cure time is 24 hours
but this may be
accelerated with heat.
Do not apply polyester
based putty/fillers on
urethane products.
SMC/FRP Fiberglass Repair
Fiberglass Matting Adhesive
❚A low viscosity two-part urethane used to saturate fiberglass cloth when
preparing backup patches
❚The self-leveling feature allows the Matting Adhesive to be used for filling
cracks and channels as well
Fiberglass Mat
❚For reinforcing SMC, FRP and fiberglass repairs
❚Perfect for large repairs where extra reinforcement is needed
Fiberglass and SMC Cloth
❚Excellent for any backup repair – large or small
❚Conforms to any shape
400ml 2:1 Cartridge
PART CLAMPING OR SANDING OR
NUMBER DESCRIPTION WORK TIME FIXTURE TIME PAINTING TIME
04674
Epoxy Panel Bonding Adhesive 90 minutes 4 hours 8 hours
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628. GLASS BEADS FOR ADEQUATE SPACING.
SMC/FRP
Fiberglass
Panel
Bonding

Epoxy Adhesives

Times will increase as temperatures
decrease.
Times shown above are at 77f/25c. Full cure time is 24 hours but this may be
accelerated with heat.
Rigid Parts Repair and Flexible Plastic
Parts Repair
Quickly repair SMC, FRP, fiberglass and plastic parts. Designed for easy
sanding and excellent feather edging, these products are a proven adhesive
and filler for all rigid and flexible parts. Formulated to finish the front side
of repairs used over the top of urethane adhesives.
400ml 1:1 Cartridge
PART SANDING OR
NUMBER DESCRIPTION WORK TIME PAINTING TIME
04675
Rigid Parts Epoxy Adhesive 6 mintues 12 minutes
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628
400ml 1:1 Cartridge
PART SANDING OR
NUMBER DESCRIPTION WORK TIME PAINTING TIME
04676
Flexible Parts Epoxy Adhesive 6 mintues 12 minutes
04625
Adhesion Promoter for TPO Repair
--
USE APPLICATOR GUN #41398 MANUAL OR #41396 PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628 #04675 #04676
Accessories
© Saint-Gobain Abrasives, Inc. February 2007
PLIOGRIP® ADHESIVE Manufactured by Ashland Inc., Columbus,
OH • ®PLIOGRIP is a registered trademark of, Ashland Inc.
The Norton logo and SpeedGrip are registered trademarks of
Saint-Gobain Abrasives, Inc.
FORM # 7890
If polyester putty/filler must be used, skim coat
over the SpeedGrip repair area using SpeedGrip
Rigid Repair Adhesive #04675 or SpeedGrip Flexible
Repair Adhesive #04676.
400ml 1:1 Cartridge
PART OEM APPROVED SANDING OR
NUMBER DESCRIPTION PLIOGRIP® NO. SIZE OPEN TIME PAINTING TIME
04680
Fiberglass Matting Adhesive 7779-L 400ml 1:1 cartridge 10 minutes 45 minutes
04690
Fiberglass Mat - 36" X 38" (9.5 sq. ft.) – –
04691
Fiberglass and SMC Cloth - 36" X 38" (9.5 sq. ft.) – –
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628.
PART
NUMBER DESCRIPTION
41396
Pneumatic Applicator Gun 400ml
41398
Manual Applicator Gun 400ml
41397
Pneumatic Applicator Gun 600ml
04627
Mixing Tip Square 18 Element (blue)
04628
Mixing Tip Square 24 Element (green)
PART
NUMBER DESCRIPTION
04631
Structural Backing Patch
04632
Nylon Reinforcing Tape
04623
Plastic Parts Cleaner – 1 quart
82780
Panel & Adhesive Cleaner – 1 quart
www.nortonautomotive.com
FOR TECHNICAL HELP: 1 866 879-3761 ®
OEM APPROVED
®