Nx Networks 3000 manual Connecting to a PC, Connect the CSU/DSU to the Frame Relay switch

Connecting Your 3000 Series Secure Gateway Router

2.Connect the CSU/DSU to the Frame Relay switch.

3000 Series

3000 Series

ALM OK PWR

			DATA		ETH
			D1 D2	D3
	VOICE
V1	V2	V3	V4

CSU/DSU

Frame

Relay

CSU/DSU

Internet or Other WAN

Internet

Service

Provider

Connecting to a PC

To configure and monitor the 3000 Series through its console port, you can connect a PC or terminal to the console port. (You can also configure and monitor the router by connecting to its Ethernet port. See Configuring Your 3000 Series Secure Gateway Router on page 25.)

To connect a PC or terminal locally to the gateway router, use the 9-pin to 9- pin null modem cable that comes with the 3000 Series and, if needed, the 9- pin to 25-pin adapter. The following figure shows how to connect a PC or terminal directly to the 3000 Series.

1.Connect one end of the null-modem cable to the Console connector on the back panel of your gateway router.

2.Connect the other end of the cable to your PC.

22 3000 Series User Guide