TRANSPORT AND STORAGE
•If possible, transport your BC and AIR XS II Assembly (preferably dry) in a padded carrying case or equipment bag separated from sharp items (i.e. dive knife, spear gun, etc.) that might damage or scratch the components.
•You should also protect the AIR XS II from damage from heavy ob- jects (i.e., dive light, regulator assemblies, tanks, etc.).
•Prior to storing your AIR XS II, ensure that it is clean and dry.
•If you were unable to clean it prior to transport, or if it became ex- posed to other equipment that was not clean prior to transport (such as a wet suit), clean it thoroughly and allow it to dry naturally.
SERVICE
WARNING: DO NOT attempt to disassemble or repair any components of the AIR XS II, or to adjust the Regulator. Doing so could cause misoperation while underwater resulting in serious injury or death. It will also void the warranty.
•Once each year, your complete BC/AIR XS II assembly should be inspected and serviced by an Authorized Oceanic Dealer. More frequent service is recommended if you dive in severe conditions or more frequently than an average diver (see Guidelines on page 13).
•In the event that any component of your Regulator assembly requires any form of repair or service, take it to an Authorized Oceanic Dealer for professional service by a trained technician authorized to perform Oceanic factory authorized service.
•Provide the Dealer with a copy of the original sales receipt and your copy of the warranty registration card.
•Inspection and service costs are not covered by the limited war- ranty.
12