COMPATIBILITY AND INSTALLATION

The AIR XS II low pressure inflator hose is compatible with all Oceanic first stage regulators. It may not be compatible with other manufacturers' first stages (thread size = 3/8-24 UNF). Have your AIR XS II installed on your BC, and the low pressure inflator hose attached to your regulator first stage, by an Authorized Oceanic Dealer.

Connect the quick disconnect (QD) end of the inflator hose to the AIR XS

IIusing the QD coupling. To attach it, grasp the coupling on the end of the inflator hose between the palm of your hand and fingers, and pull back the coupling release with your thumb and forefinger. While holding back the coupling release, press it onto the quick release fitting on the AIR XS II, and let go of the coupling release while continuing to hold the hose onto the quick release fitting.

Ensure they are firmly attached prior to pressurizing the regulator/inflator system.

NOTE: Refer to the illustration on page 2 for identification of components.

FEATURES

OPERATING BUTTONS

The three operating buttons, one located on each side of the mouthpiece and one above the mouthpiece, can be differentiated by look, position, and tactile feel. Become familiar with their use to minimize the possibility of confusion.

•Top - regulator purge button

•Left - power inflator button

•Right - manual inflator/deflator button

5